• Dr. Guillermo Reyes Pozo

Dr. Guillermo Reyes
Engineering of Industrial Products 
IQS School of Engineering
Universitat Ramon Llull
Via Augusta 390, E-08017 Barcelona, Spain
Tel.:+34 932 672 000/ +34 932 672 038
Fax: +34 939 056 266


Industrial Engineering emphasis Mechanics (1989, Universidad de Holguín, Cuba)
Industrial Engineering Doctorate (2000, UPC)

Professor, 2017
Head of Industrial Engineering Department, 2011- 2018-
Head, Department of Chemical Engineering and Materials Science, 2021-
Vice Dean of International Relations of IQS School of Engineering 2021-


Machine Theory
Manufacturing Processes
Machine Manufacturing Technologies 
Computer Integrated Manufacturing 


Research Lines

  • Product Lifecycle Management
  • Aditive Manufacturing


Representative publications

Miquel Domingo-Espin; Josep M. Puigoriol-Forcada; Andres-Amador Garcia-Granada; Jordi Llumà; Salvador Borros; Guillermo Reyes. Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts. Materials & Design. Vol. 83. Pp 670-677. (Año, Any, Year) 2015.
Andres Amador García-Granada; Giovanni Gomez-Gras; Ramón Jerez-Mesa, J. Antonio Travieso-Rodriguez; Guillermo Reyes. Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4. Materials and Manufacturing Processes. Vol. 32. N. 11. Pp. 1279-1289. (Año, Any, Year)  2017
A. G. Salazar-Martín; A. A. García-Granada; G. Reyes; G. Gomez-Gras; J. M. Puigoriol-Forcada. Time-Dependent Mechanical Properties in Polyetherimide 3D-Printed Parts Are Dictated by Isotropic Performance Being Accurately Predicted by the Generalized Time Hardening Model. Polymers. Vol. 12. N. 3. (Año, Any, Year)  2020

Forés-Garriga, A.; Pérez, Marco A.; Gómez-Gras, G.; Reyes-Pozo, G. Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF. Materials & Design. Vol. 193. (Año, Any, Year)  2020

Giovanni Gómez-Gras; Marco A. Pérez*; Jorge Fábregas-Moreno; Guillermo Reyes-Pozo. Experimental study on the accuracy and surface quality of printed versus machined holes in PEI Ultem 9085 FDM specimens. Rapid Prototyping Journal. Vol. 27. N.11. Pp. 1-12. (Año, Any, Year)  2021

Iván Rivet, Narges Dialami, Miguel Cervera, Michele Chiumenti, Guillermo Reyes, Marco A. Pérez. Experimental, computational, and cimensional analysis of the mechanical performance of fused filament fabrication parts. Polymers. Vol. 13. (Año, Any, Year)  2021
A. Serra-Aguila; J. M. Puigoriol-Forcada; G. Reyes; J. Menacho
Viscoelastic models revisited: characteristics and interconversion formulas for generalized Kelvin-Voigt and Maxwell models
Acta Mechanica Sinica Online 
2019. DOI: 10.1007/s10409-019-00895-6
Antonio G. Salazar-Martín; Marco A. Pérez; Andrés-Amador García-Granada; Guillermo Reyes; Josep M. Puigoriol-Forcada
A Study of creep in polycarbonate fused deposition modelling parts
Materials & Design
2018. DOI: j.matdes.2018.01.008
E. Dimla, J. Rull-Trinidad, A.-A. Garcia-Granada, G. Reyes
Thermal Comparison of Conventional and Conformal Cooling Channel Designs for a Non-Constant Thickness Screw Cap
Journal of Korean Society Precision Engineering
2018. DOI: 10.7736/KSPE.2018.35.1.95
J. Menacho; L. Rotllant; J.J. Molins; G. Reyes; A.A. García-Granada; M. Balcells; J. Martorell
Arterial pulse attenuation prediction using the decaying rate of a pressure wave in a viscoelastic material model
Biomechanics And Modeling In Mechanobiology
2018. DOI: 10.1007/s10237-017-0980-9

Autores (p.o. de firma):Manuel Guzmán, Guillermo Reyes, Núria Agulló, Salvador Borrós

Título:Synthesis of Zn/Mg Oxide Nanoparticles and Its Influence on Sulphur Vulcanization
Revista:Journal of Applied Polymer Science
Volumen:119 Número: 4 Páginas, inicial: 2048 final: 2057 Año: 2010 Lugar de publicación: ESTADOS UNIDOS DE AMÉRICA ISSN: 0021-8995

Autores (p.o. de firma):P. Serret; S. Colominas; G. Reyes; J. Abellà

Título:Characterization of ceramic materials for electrochemical hydrogen sensors
Revista:Fusion Engineering and Design (doi:10.1016/j.fusengdes.2011.01.029)
Volumen:86 Número: --- Páginas, inicial: 2446 final: 2449 Año: 2011 Lugar de publicación: SUIZA ISSN: 0920-3796

L. Llivina; S. Colominas; G. Reyes; J. Abellà
Progress on the development of H-concentration probes in eutectic lead–lithium: Synthesis and characterization of electrochemical sensor materials
Fusion Engineering and Design. Vol. 87. No. 7-8. Pp. 979-982. Año 2012
D. Olivier; S. Borrós; G. Reyes
Application-driven methodology for new additive manufacturing materials development
Rapid Prototyping Journal
Vol. 20. No. 1. Pp. 50-58. Año 2014
M. Domingo-Espin, S. Borrós, N. Agulló, A. A. García-Granada, G. Reyes
Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts
3D Printing and Additive Manufacturing
Vol. 1. No. 2. Pp. 70-77. Año 2014
A. Pérez-Peña, A. A. García-Granada, J. Menacho, J. J. Molins, G. Reyes
A methodology for damping measurement of engineering materials: application to a structure under bending and torsion loading
Journal of Vibration and Control
Published online 11 September 2014. DOI: 10.1177/1077546314547728 



Engineering of Industrial Products  (GEPI)
Principal investigator