Dr. Josep Maria Puigoriol Forcada

Subjects

Strength of Materials (Undergraduate Program in Industrial Engineering Technology)
Mechanics of Materials (Undergraduate Program in Industrial Engineering Technology)
Mechanical Characterization and other Properties (Master's Degree in Materials Science and Engineering)
Modelling and simulation Engineering (Master's Degree in Industrial Engineering)

Research Lines

1. Mechanical characterization of new materials.
1.1.   Fused Deposition Modeling FDM. 3D structures.
1.2.   Fatigue in new materials.
1.3.   Creep in new materials.
2. Characterization of FEM models in biomechanical environments.

rellevant publications

A. Serra-Aguila, J. M. Puigoriol-Forcada, G. Reyes, and J. Menacho, “Estimation of Tensile Modulus of a Thermoplastic Material from Dynamic Mechanical Analysis: Application to Polyamide 66,” Polymers, vol. 14, no. 6. p. 1210, 2022.

A. G. Salazar-Martín, A. A. García-Granada, G. Reyes, G. Gomez-Gras, and J. M. Puigoriol-Forcada, “Time-Dependent Mechanical Properties in Polyetherimide 3D-Printed Parts Are Dictated by Isotropic Performance Being Accurately Predicted by the Generalized Time Hardening Model,” Polymers (Basel)., vol. 12, no. 3, p. 678, 2020.

A. Serra-Aguila, J. M. Puigoriol-Forcada, G. Reyes, and J. Menacho, “Viscoelastic models revisited: characteristics and interconversion formulas for generalized Kelvin–Voigt and Maxwell models,” Acta Mech. Sin. Xuebao, vol. 35, no. 6, pp. 1191–1209, 2019.

F. López Navarro, M. L. Espasa Sempere, and J. M. Puigoriol Forcada, “Implementation of PLM Methodology in university teaching. Automotive case type,” in 22nd International Congress on Project Management and Engineering (Madrid, July 2018), 2018.

J. M. Puigoriol-Forcada, A. Alsina, A. G. Salazar-Martín, G. Gomez-Gras, and M. A. Pérez, “Flexural Fatigue Properties of Polycarbonate Fused Deposition Modelling Parts,” Mater. Des., vol. 155, pp. 414–421, 2018.

J. M. Puigoriol-Forcada, G. Icart-Martori, J. Menacho Solà Morales, and F. López Navarro, “First stage of structural viability of a real component manufactured by FDM (Fudes Deposition Modeling) 3D Printing. Case: Door handle from a car,” DYNA, 2018.

A. G. Salazar-Martín, M. A. Pérez, G. Reyes, and J. M. Puigoriol-Forcada, “A Study of Creep in Polycarbonate Fused Deposition Modelling Parts,” Mater. Des., vol. 141, pp. 414–425, 2018.

F. López Navarro, R. Ros Fàbrega, D. Castañeda Fernández, G. Reyes Pozo, and J. M. Puigoriol Forcada, “Design and optimization of a dental implant,” in Proceedings from the 21th International Congress on Project Engineering (Cádiz, July 2017), 2017.

J. M. Puigoriol-Forcada, A.-A. García-Granada, F. López Navarro, and G. Reyes Pozo, “Design of experiments methodology to improve the structural behaviour of a Leg Rest Handle,” Dyna-Bilbao, vol. 91, no. 4, 2016.

J. M. Puigoriol-Forcada, A.-A. García-Granada, M. Peña Aguilar, and G. Reyes Pozo, “Structural Analysis of an automotive interior system. Practical learning in the context of the new EHEA,” Dyna-Bilbao, vol. 91, no. 3, pp. 272–276, 2016.

M. Domingo-Espin, J. M. Puigoriol-Forcada, A.-A. Garcia-Granada, J. Llumà, S. Borros, and G. Reyes, “Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts,” Mater. Des., vol. 83, pp. 670–677, Oct. 2015.

J. Pina-Estrany, J. Fraxedas, F. Perez-Murano, C. Colominas, J. M. Puigoriol-Forcada, and A. A. García-Granada, “Simulation of plastic injection for nanostructure pattern replication,” in PRN2015. Polymer Replication on Nanoscale. 2nd International Conference, 2015.

M. Domingo-espin, S. Borros, J. M. Puigoriol-Forcada, and G. Reyes, “A methodology to choose the best building direction for Fused Deposition Modeling end-use parts,” in iCat14, 2014.

J. M. Puigoriol Forcada, F. López Navarro, and G. Reyes Pozo, “Validación de una metodología de caracterización elastoplástica cuasi-estática simplificada de materiales termoplásticos inyectados en proceso industrial para simulación estructural,” in AEIPRO 2014.

J. Fraxedas, U. Staufer, R. M. Schmidt, J. Spronck, E. Rull Trinidad, R. Deng, G. Schitter, M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, R. Koops, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. García-Granada, and J. M. Puigoriol-Forcada, “Automated in-line Metrology for Nanoscale Production – aim4np,” vol. 663, no. 2002. p. 4231, 2013.

R. Koops, U. Staufer, R. Munnig Schmidt, J. Spronck, E. Rull Trinidad, R. Deng, S. G., M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, J. Fraxedas, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. A. Garcia-Granda, and J. M. Puigoriol-Forcada, “Automated in-line Metrology for Nanoscale Production - aim4np.” Athens, p. 25178, 2012.

J. M. Puigoriol Forcada, J. Andrés Martínez, G. Reyes Pozo, and J. Menacho Solà-Morales, “Desarrollo de una metodología basada en el método de los elementos finitos para la proyección de estructuras tenségridas,” in Proceedings from the 16th International Congress on Project Engineering (Valencia, July 2012), 2012, pp. 0667–0680.

J. M. Puigorioland G. Reyes, “Una caracterización elastoplástica de materiales poliméricos inyectados en proceso industrial para simulación estática estructural,” in Proceedings from the 16th International Congress on Project Engineering (Valencia, July 2012), 2012, pp. 2210–2222.

Research Groups

Group of Engineering of Idustrial Products (GEPI).2013
Grup de Recerca d'Enginyeria de la Corrosió i dels Materials Metàl·lics (ECOR) 2006-2013