• Dr. Josep Maria Puigoriol Forcada

Dr. Josep Maria Puigoriol
Grup d’Enginyeria de Productes Industrials (GEPI)
IQS School of Engineering
Universitat Ramon Llull
Via Augusta 390, E-08017 Barcelona, España
Telf: +34 932 672 412
Fax: +34 932 056 266

email: 
josep.puigoriol@iqs.url.edu

Doctor (2013, IQS-URL). Ingeniero Industrial Técnico Superior, intensificación Mecánica de Estructuras (1995, ETSEIB-UPC)
Ingeniero de Simulación y de Análisis Estructural para sistemas de interior de automoción, Faurecia Interior Systems (1999-2012)

Coordinador del Master en Ingeniería Industrial, 2016-2019
Responsable del Laboratorio SEAT-IQS, 2016-2018
Responsable del Laboratori d’Enginyeria de Productes Industrials, LEPI, 2014-2016

Profesor Titular, 2022-
Profesor Contratado Doctor, 2013-2022
Profesor Asociado, 2001-2013
 

Asignaturas

Mecánica de Materiales (Grado en Ingeniería en Tecnologías Industriales), Resistencia de Materiales (Grado en Ingeniería en Tecnologías Industriales), Caracterización del comportamiento Mecánico y otras Propiedades (Máster Universitario en Ciencia e Ingeniería de Materiales), Modelado y Simulación en Ingeniería (Máster Universitario en Ingeniería Industrial).

 

Líneas de Investigación

1. Caracterización mecánica de nuevos materiales.
1.1. Fused Deposition Modeling FDM. Estructuras 3D.
1.2. Fatiga en nuevos materiales.
1.3. Creep en nuevos materiales.
2. Caracterización de modelos FEM en entornos biomecánicos.

 

PUBLICACIONES RELEVANTES

A. Serra-Aguila, J. M. Puigoriol-Forcada, G. Reyes, and J. Menacho, “Estimation of Tensile Modulus of a Thermoplastic Material from Dynamic Mechanical Analysis: Application to Polyamide 66,” Polymers, vol. 14, no. 6. p. 1210, 2022.

A. G. Salazar-Martín, A. A. García-Granada, G. Reyes, G. Gomez-Gras, and J. M. Puigoriol-Forcada, “Time-Dependent Mechanical Properties in Polyetherimide 3D-Printed Parts Are Dictated by Isotropic Performance Being Accurately Predicted by the Generalized Time Hardening Model,” Polymers (Basel)., vol. 12, no. 3, p. 678, 2020.

A. Serra-Aguila, J. M. Puigoriol-Forcada, G. Reyes, and J. Menacho, “Viscoelastic models revisited: characteristics and interconversion formulas for generalized Kelvin–Voigt and Maxwell models,” Acta Mech. Sin. Xuebao, vol. 35, no. 6, pp. 1191–1209, 2019.

F. López Navarro, M. L. Espasa Sempere, and J. M. Puigoriol Forcada, “Implementation of PLM Methodology in university teaching. Automotive case type,” in 22nd International Congress on Project Management and Engineering (Madrid, July 2018), 2018.

J. M. Puigoriol-Forcada, A. Alsina, A. G. Salazar-Martín, G. Gomez-Gras, and M. A. Pérez, “Flexural Fatigue Properties of Polycarbonate Fused Deposition Modelling Parts,” Mater. Des., vol. 155, pp. 414–421, 2018.

J. M. Puigoriol-Forcada, G. Icart-Martori, J. Menacho Solà Morales, and F. López Navarro, “First stage of structural viability of a real component manufactured by FDM (Fudes Deposition Modeling) 3D Printing. Case: Door handle from a car,” DYNA, 2018.

A. G. Salazar-Martín, M. A. Pérez, G. Reyes, and J. M. Puigoriol-Forcada, “A Study of Creep in Polycarbonate Fused Deposition Modelling Parts,” Mater. Des., vol. 141, pp. 414–425, 2018.

F. López Navarro, R. Ros Fàbrega, D. Castañeda Fernández, G. Reyes Pozo, and J. M. Puigoriol Forcada, “Design and optimization of a dental implant,” in Proceedings from the 21th International Congress on Project Engineering (Cádiz, July 2017), 2017.

J. M. Puigoriol-Forcada, A.-A. García-Granada, F. López Navarro, and G. Reyes Pozo, “Design of experiments methodology to improve the structural behaviour of a Leg Rest Handle,” Dyna-Bilbao, vol. 91, no. 4, 2016.

J. M. Puigoriol-Forcada, A.-A. García-Granada, M. Peña Aguilar, and G. Reyes Pozo, “Structural Analysis of an automotive interior system. Practical learning in the context of the new EHEA,” Dyna-Bilbao, vol. 91, no. 3, pp. 272–276, 2016.

M. Domingo-Espin, J. M. Puigoriol-Forcada, A.-A. Garcia-Granada, J. Llumà, S. Borros, and G. Reyes, “Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts,” Mater. Des., vol. 83, pp. 670–677, Oct. 2015.

J. Pina-Estrany, J. Fraxedas, F. Perez-Murano, C. Colominas, J. M. Puigoriol-Forcada, and A. A. García-Granada, “Simulation of plastic injection for nanostructure pattern replication,” in PRN2015. Polymer Replication on Nanoscale. 2nd International Conference, 2015.

M. Domingo-espin, S. Borros, J. M. Puigoriol-Forcada, and G. Reyes, “A methodology to choose the best building direction for Fused Deposition Modeling end-use parts,” in iCat14, 2014.

J. M. Puigoriol Forcada, F. López Navarro, and G. Reyes Pozo, “Validación de una metodología de caracterización elastoplástica cuasi-estática simplificada de materiales termoplásticos inyectados en proceso industrial para simulación estructural,” in AEIPRO 2014.

J. Fraxedas, U. Staufer, R. M. Schmidt, J. Spronck, E. Rull Trinidad, R. Deng, G. Schitter, M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, R. Koops, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. García-Granada, and J. M. Puigoriol-Forcada, “Automated in-line Metrology for Nanoscale Production – aim4np,” vol. 663, no. 2002. p. 4231, 2013.

R. Koops, U. Staufer, R. Munnig Schmidt, J. Spronck, E. Rull Trinidad, R. Deng, S. G., M. Thier, S. Messineo, S. Ito, R. Hainisch, R. Saathof, J. Fraxedas, F. Perez-Murano, A. Verdaguer, A. Blümel, E. J. W. List-Kratochvil, M. van Veghel, R. Sum, A. Lieb, W. Schott, D. Dontsov, T. Sulzbach, W. Engl, C. Penzkofer, C. Colominas, K. Fluch, A. A. Garcia-Granda, and J. M. Puigoriol-Forcada, “Automated in-line Metrology for Nanoscale Production - aim4np.” Athens, p. 25178, 2012.

J. M. Puigoriol Forcada, J. Andrés Martínez, G. Reyes Pozo, and J. Menacho Solà-Morales, “Desarrollo de una metodología basada en el método de los elementos finitos para la proyección de estructuras tenségridas,” in Proceedings from the 16th International Congress on Project Engineering (Valencia, July 2012), 2012, pp. 0667–0680.

J. M. Puigorioland G. Reyes, “Una caracterización elastoplástica de materiales poliméricos inyectados en proceso industrial para simulación estática estructural,” in Proceedings from the 16th International Congress on Project Engineering (Valencia, July 2012), 2012, pp. 2210–2222.

 

Grupos de investigación

Grupo de Ingeniería de Productos Industriales (GEPI). 2013-

Grup de Recerca d’Enginyeria de la Corrosió i dels Materials Metàl·lics (ECOR). 2006-2013